Mersedes SUV Manuals

Trip menu

Mercedes-Benz G-Class / Mercedes-Benz G-Class Owners Manual / On-board computer and displays / Menus and submenus / Trip menu

Standard display

► Press and hold the  button on


Press and hold the the button on
the steering wheel until the Trip menu with trip odometer 1 and odometer 2 is shown.

Trip computer "From start" or "From reset"

Example: trip computer "From Start"


Example: trip computer "From Start"

1 Distance
2 Time
3 Average speed
4 Average fuel consumption

Press the button on the or
steering wheel to select the Trip menu. button on the
steering wheel to select the Trip menu.

Press to select From Start or
or From Reset. to select From Start
or From Reset.

The values in the From Start submenu are calculated from the start of a journey whilst the values in the From Reset submenu are calculated from the last time the submenu was reset .

The From Start trip computer is automatically reset when: Х The ignition has been switched off for more than four hours.

Х 999 hours have been exceeded.

Х 9,999 miles have been exceeded.

The From Reset trip computer is automatically reset if the value exceeds 9,999 hours or 99,999 miles.

Displaying the range and current fuel consumption

1 Approximate range


1 Approximate range
2 Current fuel consumption (not for AMG vehicles)

Press the button on the or
steering wheel to select the Trip menu. button on the
steering wheel to select the Trip menu.

Press the button to select the or
current fuel consumption (not for AMG button to select the
current fuel consumption (not for AMG vehicles) and the approximate range.

The approximate range that can be covered depends on the fuel level and your current driving style. If there is only a small amount of fuel left in the fuel tank, the display shows a vehicle being refueled C instead of the range.

Digital speedometer

1 Digital speedometer


1 Digital speedometer

Press the button on the or
steering wheel to select the Trip menu. button on the
steering wheel to select the Trip menu.

Press the button to select the or
digital speedometer. button to select the
digital speedometer.

Resetting values

Example: resetting the trip computer "From Start"


Example: resetting the trip computer "From Start"

Press the button on the or
steering wheel to select the Trip menu. button on the
steering wheel to select the Trip menu.

Press the button to select the or
function that you wish to reset. button to select the
function that you wish to reset.

Press the ► Press the  button to select Yes button.


Press the and button to select Yes
and press the button to confirm.


You can reset the values of the following functions:
Х Trip odometer Х "From Start" trip computer Х "From Reset" trip computer

    See also:

    Wheel and tire combinations
    Please bear the following in mind For safety reasons, Mercedes-Benz recommends that you only use Tires and wheels which have been approved by Mercedes-Benz specifically for your vehicle. The ...

    Coupling up a trailer
    Do not connect the trailer's brake system (if featured) to the hydraulic brake system of the towing vehicle, as the latter is equipped with an anti-lock brake system. Doing so will result in a l ...

    Underinflated or overinflated tires
    WARNING Tires with pressure that is too low can overheat and burst as a consequence. In addition, they also suffer from excessive and/ or irregular wear, which can severely impair the braking pro ...

    © 2019 Copyright www.mersuv.com