You can change the settings of the locking system. This means that only the driver's door and the fuel filler flap are unlocked when the vehicle is unlocked. This is useful if you frequently travel on your own.
■ To change the setting: press and hold
down the and
buttons simultaneously for
approximately six seconds until the battery check lamp flashes twice .
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the or
button:
• locks or
• unlocks the vehicle
The SmartKey now functions as follows: ■ To unlock the driver's door: press the button once.
■ To unlock centrally: press the
button twice.
■ To lock centrally: press the
button.
The KEYLESS-GO function is changed as
follows:
■ To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
■ To unlock centrally: touch the inner surface of the door handle on the frontpassenger door or the rear door.
■ To lock centrally: touch the outer sensor surface on one of the door handles .
■ To restore the factory settings: press
and hold down the and
buttons simultaneously for
approximately six seconds until the battery check lamp flashes twice .
Automatic transmission
Important safety notes
WARNING
It is dangerous to shift the automatic
transmission out of parking position P or
neutral position N if the engine speed is
higher than idle speed. If your foot is ...
Displaying the coolant temperature
WARNING
Driving when your engine is overheated can
cause some fluids which may have leaked into
the engine compartment to catch fire. You
could be seriously burned.
Steam from an overheated eng ...
ESP® (Electronic Stability Program)
Important safety notes
Observe the "Important safety notes"
section .
WARNING
If ESP® is malfunctioning, ESP® is unable to
stabilize the vehicle. Additionally, further
driving safety s ...