Resetting the side windows
If a side window can no longer be closed fully, you must reset it.
■ Close all the doors.
■ Turn the SmartKey to position 1 or 2 in the ignition lock.
■ Pull the corresponding switch on the door control panel until the side window is completely closed. ■ Hold the switch for an additional second.
If the side window opens again slightly: ■ Immediately pull the corresponding switch on the door control panel until the side window is completely closed .
■ Hold the switch for an additional second.
■ If the corresponding side window remains closed after the button has been released, the side window has been reset correctly.
If this is not the case, repeat the steps above again.
Problems with the side windows
WARNING
Closing the side windows with increased force or without the anti-entrapment feature could lead to serious or even fatal injury. Make sure that nobody can become trapped when closing the side windows.
See also:
Notes on driving
If the vehicle is heavily loaded, check the tire
pressures and correct them if necessary.
When parking your vehicle, make sure that
the tires do not get deformed by the curb or
other obstacles. ...
Electric parking brake
General notes
WARNING
If you leave children unsupervised in the
vehicle, they could set it in motion by, for
example:
• releasing the parking brake
• shifting the automatic transmission out of
...
Treadwear
The treadwear grade is a comparative rating
based on the wear rate of the tire when tested
under controlled conditions on a specified
U.S. government course. For example, a tire
graded 150 would w ...