General notes
Pay attention to the important safety notes .
Do not rotate the head restraints of the front and rear seats. Otherwise, you cannot adjust the height and angle of the head restraints to the correct position.
Adjusting the head restraints manually
Adjusting the head restraint height
■ To raise: pull the head restraint up to the desired position.
■ To lower: press release catch 1 in the direction of the arrow and push the head restraint down to the desired position.
Adjusting the fore/aft position of the head restraint
With this function you can adjust the distance between the head restraint and the back of the seat occupant's head.
■ To adjust forwards:
pull the head restraint forwards in the direction of the arrow until it engages.
There are several notches.
■ To move backwards
: press and hold release button 1 and push the head restraint backwards.
■ When the head restraint is in the desired position, release the button and make sure that the head restraint is engaged in position.
Adjust the head restraint so that the back of your head is as close to the head restraint as possible.
Adjusting the head restraints electrically
■ To adjust the head restraint height: slide the switch for head restraint adjustment up or down in the direction of the arrow.
Adjusting the luxury head restraints
■ To adjust the side bolsters of the head restraint: push or pull right and/or lefthand side bolster 1 into the desired position.
■ To adjust the fore/aft position of the head restraint: push or pull the head restraint in the direction of arrow 2.
Adjust the head restraint so that the back of your head is as close to the head restraint as possible.
Rear seat head restraints
Adjusting the rear seat head restraint height
■ Once the head restraint is fully lowered, press release catch 1.
■ To raise: pull the head restraint up to the desired position.
■ To lower: press release catch 1 and push the head restraint down until it is in the desired position.
Removing and installing the rear seat head restraints
■ To remove: pull the head restraint up to the stop.
■ Press release catch 1 and pull the head restraint out of the guides.
■ To re-install: insert the head restraint so that the notches on the bar are on the left when viewed in the direction of travel.
■ Push the head restraint down until you hear it engage in position.
Telephone menu
Introduction
WARNING
The driver's attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
loc ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
...
Garage door opener
Important safety notes
WARNING
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
...