Turn signal
1 High-beam headlamps
2 Turn signal, right
3 High-beam flasher
4 Turn signal, left
■ To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 or 4.
The corresponding turn signal flashes three times.
■ To indicate: press the combination switch beyond the pressure point in the direction of arrow 2 or 4.
High-beam headlamps
1 High-beam headlamps
2 Turn signal, right
3 High-beam flasher
4 Turn signal, left
■ To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
■ Turn the light switch to or
.
■ Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The blue indicator lamp in the
instrument cluster lights up when the highbeam
headlamps are switched on.
■ To switch off the high-beam headlamps: move the combination switch back to its normal position.
The blue indicator lamp in the
instrument cluster goes out.
Vehicles with Adaptive Highbeam Assist: when Adaptive Highbeam Assist is active, it controls activation of the high-beam headlamps .
High-beam flasher
1 High-beam headlamps
2 Turn signal, right
3 High-beam flasher
4 Turn signal, left
■ To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine.
■ Pull the combination switch in the direction of arrow 3.
Stowage space
Important safety notes
WARNING
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
storing objects in the vehicle. Put luggage or
cargo in the cargo compartmen ...
TIREFIT kit
Important safety notes
WARNING
In the following situations, the tire sealant is
unable to provide sufficient breakdown
assistance, as it is unable to seal the tire
properly:
• there are cuts or ...
Program selector button
General notes
The program selector button allows you to
choose between drive programs with
different driving characteristics.
In AMG vehicles, drive program E is called
drive program C.
...