Activating/deactivating the residual heat function
The "residual heat" function is only available in Canada.
It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.
■ To activate: press the 
button.
The indicator lamp in the 
button lights up.
The blower will run at a low speed regardless of the airflow setting.
If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed.
■ To deactivate: press the 
button.
The indicator lamp in the 
button goes out.
Residual heat is deactivated automatically: • after approximately 30 minutes • when the ignition is switched on • if the battery voltage drops • when the auxiliary heating is activated
See also:
Flat tire
You can find information on what to do in the event of a flat tire in the
"Breakdown assistance" section .
Information on driving with MOExtended tires in the event of a flat tire ...
Data stored in the vehicle
Information about electronic data
acquisition in the vehicle
(Including notice pursuant to California Code
§ 9951)
Your vehicle records electronic data. If your
vehicle is equipped with mbrace (C ...