Program selector button
General notes
■ Briefly press program selector button 1.
The letter M appears in the multifunction display. The manual drive program M is activated.
Program selector button on AMG vehicles
■ Press program selector button 1 repeatedly until the letter for the desired gearshift program appears in the multifunction display.
The program selector button allows you to choose between different driving characteristics.
AMG vehicles
: the automatic transmission switches to automatic drive program C each time the engine is started.
Drive program M is not saved after the engine has been switched off. If required, you must select the drive program again after starting the engine.
Drive programs on AMG vehicles
For further information on the automatic drive program, see .
Steering wheel paddle shifters
In the automatic drive program, you can restrict or derestrict the shift range by using steering wheel paddle shifters 1 and 2 .
In the manual drive program you can change gears manually using steering wheel paddle shifters 1 and 2 .
You can only change gear with the steering wheel paddle shifters when the transmission is in position D.
See also:
Driving on wet roads
Do not drive through flooded areas.
Check the depth of any water before driving
through it. Drive slowly through standing
water. Otherwise, water may enter the
vehicle interior or the engine com ...
Tire pressure specifications
Important safety notes
WARNING
Underinflated or overinflated tires pose the
following risks:
• the tires may burst, especially as the load
and vehicle speed increase.
• the tires may wear excess ...