Mersedes SUV Manuals

Installing the ball coupling

Mercedes-Benz GL-Class / Mercedes-Benz GL-Class Owners Manual / Driving and parking / Towing a trailer / Installing the ball coupling

WARNING

If the ball coupling is not installed and secured correctly it can become detached while the vehicle is in motion and fall onto the road.

There is a risk of accident and injury.

Always install and secure the ball coupling as described. Before every journey, ensure that the ball coupling is secured with the bolt and the corresponding spring cotter.

WARNING

If the ball coupling is not installed correctly or not secured with the bolt provided and the corresponding spring cotter, the trailer may come loose. There is a risk of an accident.

Always install and secure the ball coupling as described. Before every journey, ensure that the ball coupling is secured with the bolt and the corresponding spring cotter.

WARNING

If the ball coupling is not installed and secured correctly the trailer may come loose. There is a risk of an accident.

Install and secure the ball coupling as described in the ball coupling installation instructions. Make sure that the ball coupling is installed and secured correctly before every journey.

Cover cap


Cover cap

Pull protective cap 1 in the direction of the arrow, out of the ball coupling recess.

Place protective cap 1 in the ball coupling recess.


■ Insert the ball coupling horizontally into ball


Insert the ball coupling horizontally into ball coupling recess 2 in the direction of the arrow until the holes in ball coupling 3 are in line with the holes in ball coupling recess 4.

■ Slide bolt 5 into the hole in the ball


Slide bolt 5 into the hole in the ball coupling recess and the ball coupling to the stop.

■ Secure the bolt using spring cotter 6.


Secure the bolt using spring cotter 6.

■ Check the ball coupling, bolt and spring


Check the ball coupling, bolt and spring cotter for correct installation.

If the ball coupling cannot be correctly mounted, remove the ball coupling. Under these circumstances, the ball coupling must not be used for trailer towing.

If the ball coupling cannot be locked and the key cannot be removed, remove the ball coupling and clean it. If the ball coupling can still not be installed (locked) after it has been cleaned, remove the ball coupling. The trailer tow hitch must then not be used to tow a trailer, as safe operation cannot be guaranteed.

Have the entire trailer tow hitch checked at a qualified specialist workshop.

    See also:

    Important safety notes
    WARNING If you leave children unsupervised in the vehicle, they could set it in motion by, for example: • releasing the parking brake • shifting the automatic transmission out of the parking pos ...

    Off-road driving
    Important safety notes WARNING If you drive on a steep incline at an angle or turn when driving on an incline, the vehicle could slip sideways, tip and rollover. There is a risk of an accident. ...

    Parktronic
    Important safety notes PARKTRONIC is an electronic parking aid with ultrasonic sensors. It indicates visually and audibly the distance between your vehicle and an object. PARKTRONIC is only an ...

    © 2024 Copyright www.mersuv.com