Overview
1 Multifunction display
2 Switches on the Voice Control System;
see the separate operating instructions
3 Right control panel
4 Left control panel
5 Back button
■ To activate the on-board computer: turn the SmartKey to position 1 in the ignition lock.
You can control the multifunction display and the settings in the on-board computer using the buttons on the multifunction steering wheel
Left control panel
Right control panel
Back button
Multifunction display
1 Time
2 Permanent display: outside temperature or speed
3 Text field
4 Menu bar
5 Drive program
6 Transmission position
■ To show menu bar 4 : press the= or;button on the steering wheel.
Menu bar 4 disappears after a few seconds.
Text field 3 shows the selected menu or submenu as well as display messages.
You can set the time using the audio system or COMAND; see the separate operating instructions.
The following messages may appear in the multifunction display:
Active Parking Assist
Cruise control
DSR
Off-road program (vehicles
without the ON&OFFROAD
package)
Off-road program (vehicles with
the ON&OFFROAD package)
LOW RANGE off-road gear
Adaptive Highbeam Assist
ATTENTION ASSIST
Lane Keeping Assist
Active Lane Keeping Assist
HOLD function
Distance warning function
Distance warning function
Interior lighting control
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
except for when the SmartKey is in position
...
Starting the engine
Important safety notes
WARNING
If children are left unsupervised in the vehicle,
they could:
• open the doors, thus endangering other
people or road users.
• get out and disrupt traffic.
• oper ...
Information regarding technical
data
The data stated here specifically refers to
a vehicle with standard equipment. Consult
an authorized Mercedes-Benz Center for
the data for all vehicle variants and trim
levels. ...