Automatic locking feature
1 To deactivate
2 To activate
► To disarm:
press and hold button 1 for about five seconds until a tone sounds.
► To arm
: press and hold button 2 for about five seconds until a tone sounds.
If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.
The vehicle is locked automatically when the ignition is switched on and the vehicle's wheels are moving at a speed in excess of 9 mph (15 km/h).
You could therefore be locked out if: • the vehicle is being pushed.
• the vehicle is being towed.
• the vehicle is being tested on a dynamometer.
You can also switch the automatic locking function on and off using the on-board computer .
See also:
Limiting the opening angle of the
tailgate
Important safety notes
Make sure there is sufficient clearance to
open the tailgate fully when setting the
opening angle. The tailgate could otherwise
be damaged. Ideally, set the opening angle
o ...
Audio menu
Selecting a radio station
1 Waveband
2 Station frequency with memory position
Station 2 is displayed with the station
frequency or station name. The memory
position is only displayed along with ...
Replacing bulbs
Important safety notes
Xenon bulbs
If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom a ...