The actuator is located in the cargo compartment, on the left-hand side behind the rear wall trim.
► Open the rear door.
► Pull off edge protection 1 from the door pillar in the direction of arrow 2.
► Pull away rear panel trim 3 as far as necessary in the direction of arrow 4 until the electrical connections can be accessed.
► Disconnect the electrical connections.
► Remove rear panel trim 3 completely.
► Take lug wrench 5 out of the vehicle tool kit .
► Place lug wrench 5 onto the hexagonal nut of the actuator.
► To open: turn lug wrench 5 counterclockwise.
► To close: turn lug wrench 5 clockwise.
► Reconnect the electrical connections.
► Re-install rear panel trim 3.
When doing so, hook lugs 6 of rear panel trim 3 into vehicle side wall 7.
► Re-install edge protection 1.
► Close the rear door.
Problems with fuel and the fuel tank
...
Mercedes-Benz G-Class Owners Manual
h1 {color: red;}
h2 {color: green;}
h3 {color: blue;}
h4 {color: #FF00FF;}
...
Occupant Classification System
(OCS)
Method of operation
WARNING
If the indicator lamp
illuminates
when an adult or someone larger than a small
individual is in the front passenger seat, have
the front passenger reposition himself ...