Activating/deactivating
Seat ventilation is only available for the front seats.
The three blue indicator lamps in the buttons indicate the ventilation level you have selected.
► Make sure that the SmartKey is in position 2 in the ignition lock.
► To switch on: press button 1 repeatedly until the desired ventilation level is set.
If you open the side windows and the sliding sunroof using the SmartKey , the driver's seat ventilation automatically switches to the highest level.
► To switch off
: press button 1 repeatedly until all the indicator lamps go out.
If the battery voltage is too low, the seat ventilation may switch off.
Problems with the seat ventilation
If one or all of the indicator lamps in the seat ventilation button are flashing, the seat ventilation has switched off automatically.
The vehicle's electrical system voltage is too low because too many electrical consumers are switched on.
► Switch off electrical consumers that you do not need, such as the rear window defroster or interior lighting.
Once the battery is sufficiently charged, the seat ventilation will switch back on automatically.
General notes
WARNING
Replace rims or tires with the same
designation, manufacturer and type as shown
on the original part. For further information
contact an authorized Mercedes-Benz Center.
If incorrectly ...
Closing
X Push the rear door closed from outside the
vehicle.
► If necessary, lock the vehicle with the
button on the SmartKey.
...
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
■ To activate: press the button.
The indicator lamp in the but ...