Combination switc
Turn signals
1 High-beam headlamps
2 Turn signal, right
3 High-beam flasher
4 Turn signal, l
► To indicate briefly:
press the combination switch briefly to the pressure point in the direction of arrow 2 or 4.
The corresponding turn signal flashes three times.
► To indicate
: press the combination switch beyond the pressure point in the direction of arrow 2 or 4.
High-beam headlamps
1 High-beam headlamps
2 Turn signal, right
3 High-beam flasher
4 Turn signal, left
X To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to position 2 or start the engine.
► Turn the light switch to 
or
.
► Press the combination switch beyond the pressure point in the direction of arrow 1.
In the 
position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The blue 
indicator lamp in the
instrument cluster lights up when the highbeam
headlamps are switched on.
► To switch off the high-beam headlamps
: move the combination switch back to its normal position.
The blue 
indicator lamp in the
instrument cluster goes out.
High-beam flasher
1 High-beam headlamps
2 Turn signal, right
3 High-beam flasher
4 Turn signal, left
► To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine.
► Pull the combination switch briefly in the direction of arrow 3.
See also:
Tire pressure monitor
Important safety notes
WARNING
Each tire, including the spare (if provided),
should be checked at least once a month
when cold and inflated to the pressure
recommended by the vehicle manufacturer ...
Child-proof locks
Important safety notes
WARNING
When children ride on the vehicle's rear seats,
activate the override switch. Otherwise, the
children could be injured, e.g. by trapping
themselves in the rear side ...
Editorial office
Not to be reprinted, translated or otherwise
reproduced, in whole or in part, without the
written permission of Daimler AG. ...