Front fog lamps/cornering lamps with fog lamp function
► Switch off the lights.
► Unscrew screws 1.
► Remove cover 2.
► Unscrew screws 3.
Only remove screws 3. Do not turn adjustment screw 4. If adjustment screw 4 has been turned, the front fog lamp adjustment must be checked at a qualified workshop.
► Remove lamp 5.
► Hold lamp 5.
► Lightly press bulb holder 6, turn it counter-clockwise to the stop and pull it out.
► Take bulb 7 out of bulb holder 6.
► Insert the new bulb into bulb holder 6.
► Insert bulb holder 6 into lamp A and turn it clockwise to the stop.
► Insert lamp 5.
► Replace and tighten screws 4.
► Position cover 2.
► Replace and tighten screws 1.
Turn signals
Make sure that the protective grille does not hit any painted surfaces.
You could otherwise damage the paintwork.
Do not fasten the screws too tightly. You could otherwise damage the lens.
Turn signal lamp with protection grille (AMG vehicles)
► Switch off the lights.
► AMG vehicles: pull protection grille 1 in the direction of the arrow out of mounting 2.
► Fold up protection grille 1.
Example: turn signal lamp
► Switch off the lights.
► Unscrew screws 3.
► Remove lens 4.
Example: turn signal lamp
► Turn bulb A counter-clockwise, applying slight pressure, and remove it from the bulb holder.
► Insert the new bulb into the bulb holder and turn it clockwise until it engages.
► Install lens 4.
► Replace and tighten screws 5.
► AMG vehicles: fold down protection grille 1 and allow it to engage in mounting 2.
Side marker lamps
Do not fasten the screws too tightly. You could otherwise damage the lens.
Front side marker lamp (example)
The bulbs of the front and rear side marker lamps are changed in the same way.
► Switch off the lights.
► Unscrew screws 1.
► Remove housing 2.
► Remove dust cover 3.
► Push the catch to the side and pull the bulb holder with the bulb out of housing 2.
► Lightly press bulb 4, turn it counterclockwise and pull it out.
► Insert the new bulb and, applying slight pressure, turn it clockwise until it engages.> X Insert the bulb holder into housing 2.> X Attach dust cover 3.> X Insert housing 2.> X Replace and tighten screws 3.
Opening/closing automatically from
outside
Important safety notes
WARNING
Parts of the body could become trapped
during automatic closing of the tailgate.
Moreover, people, e.g. children, may be
standing in the closing area or may enter ...
Setting the glove box air vent
Close the air vent when heating the
vehicle.
At high outside temperatures, open the air
vent and activate the "cooling with air
dehumidification" function. Otherwise,
temperature-sens ...
Important safety notes
WARNING
Very hot or very cold air can flow from the air
vents. This could result in burns or frostbite in
the immediate vicinity of the air vents. There
is a risk of injury.
Make sure that all ...