0 To remove the SmartKey
1 Power supply for some consumers, such
as the windshield wipers
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
As soon as the ignition is switched on, all the indicator lamps in the instrument cluster light up. If an indicator lamp does not go out after starting the engine or lights up while driving, see .
If the SmartKey is in position 0 in the ignition lock for an extended period of time, it can no longer be turned in the ignition lock. The steering is then locked. To unlock, remove the SmartKey and reinsert it into the ignition lock.
The steering is locked when you remove the SmartKey from the ignition lock.
► Remove the SmartKey when the engine is switched off.
The starter battery could otherwise be discharged.
If you cannot turn the SmartKey in the ignition lock, the starter battery may not be charged sufficiently.
► Check the starter battery and charge it if necessary .
or
► Jump-start the vehicle .
You can only remove the SmartKey if: Rthe SmartKey is in position 0 in the ignition lock.
Rthe automatic transmission selector lever is in P.
Setting climate control to automatic
WARNING
If you switch off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog up
more quickly. Window fogging may impair
visibility and enda ...
Operating the sliding sunroof
manually
The actuator is located in the cargo
compartment, on the left-hand side behind
the rear wall trim.
► Open the rear door.
► Pull off edge protection 1 from the door
pillar in the dir ...
Off-road driving
Important safety notes
WARNING
Do not load items on the basic carrier bars. It
may cause instability during some maneuvers
which could result in an accident.
Drive slowly in unknown terrain. Th ...