General notes
You can make a connection to the 13-pin socket on the ball coupling using an adapter or, if necessary, an adapter cable. Both can be obtained in a qualified specialist workshop.
Installing the adapter
Make sure that there is enough slack in the cable for cornering so that the cable cannot become detached.
► Open the socket cover.
► Insert the connector with lug 1 into groove 2 on the socket and turn the connector clockwise to the stop.
► Make the cover engage.
► If you are using an adapter cable, secure the cable to the trailer with cable ties.
When the socket is connected, the ultrasonic backing up aid is deactivated.
Introduction
General notes
Display messages appear in the multifunction
display.
Display messages with graphic displays may
be shown in simplified form in the Operator's
Manual and may differ from the messa ...
SmartKey positions
0 To remove the SmartKey
1 Power supply for some consumers, such
as the windshield wipers
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
As soon as the ig ...
Cargo compartment cover
Important safety notes
When loading the vehicle, make sure that
you do not stack the load in the cargo
compartment higher than the lower edge of
the side windows. Do not place heavy
objects on to ...