General notes
When they leave the factory, vehicles are not equipped with the tools needed to change a wheel, such as a jack or lug wrench. Some tools for changing a wheel are specific to the vehicle. To obtain tools approved for your vehicle, contact a qualified specialist workshop.
The vehicle tool kit contains:
R Vehicle tool kit bag with:
- a fuse extractor
- an Allen key, e.g. to operate the sliding
roof manually in an emergency
- a pump lever for the vehicle jack
- a screwdriver
- a lug wrench
R Jack
Vehicle tool kit
The vehicle tool kit is under the cover in the footwell in front of the rear bench seat.
► Fold cover 1 to the side.
► Pull vehicle tool kit 2 out by the tab.
Jack
Make sure that, while installing the vehicle jack, there are no cables on the holder, in order to avoid them becoming trapped.
The jack is located under the rear bench seat on the right-hand side when viewed in the direction of travel.
► Fold rear bench seat forwards.
► Open cover 1.
► Pull bar 3 upwards and detach from tab 4.
► Remove jack 2.
Rear window defroster
Activating/deactivating
The rear window defroster has a high current
draw. You should therefore switch it off as
soon as the rear window is clear. Otherwise,
the rear window defroster switches o ...
Stowage space
Important safety notes
WARNING
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
storing objects in the vehicle. Put luggage or
cargo in the cargo compartmen ...
EBD (electronic brake force
distribution)
Observe the "Important safety notes"
section .
WARNING
If EBD has malfunctioned, the rear wheels can
still lock, e.g. under full braking. This
increases the risk of skidding and an acci ...