Preparing the vehicle
► Stop the vehicle on solid, non-slippery and level ground, as far away as possible from traffic.
► Switch on the hazard warning lamps .
► Apply the parking brake.
► Bring the front wheels into the straightahead position.
► Move the selector lever to position P.
► Switch off the engine.
► Remove the SmartKey from the ignition lock.
The steering wheel lock stays active for as long as the SmartKey is removed.
► All occupants must get out of the vehicle.
Make sure that they are not endangered as they do so.
► Make sure that no one is near the danger area while a wheel is being changed.
Anyone who is not directly assisting in the wheel change should, for example, stand behind the barrier.
► Get out of the vehicle. Pay attention to traffic conditions when doing so.
► Close the driver's door.
Fuel/water separator
Environmental note
Dispose of service products in an
environmentally responsible manner.
If you continue driving without having the
fuel/water separator serviced, this could
cause damage to the e ...
SmartKey functions
WARNING
If children are left unsupervised in the vehicle,
they could:
• open the doors, thus endangering other
people or road users.
• get out and disrupt traffic.
• operate the vehicle's equipm ...
Maximum permissible gross vehicle
weight rating
■ Specification for maximum gross vehicle
weight 1 is listed in the Tire and Loading
Information placard: "The combined weight
of occupants and cargo should never
exceed XXX kilograms ...