Towing in the event of malfunctions
General not
If you are removing the propeller shaft, use M10 nuts as spacers on the M8 bolts and secure them with M8 nuts.
New self-locking nuts must be used when the propeller shafts are refitted.
► Observe the safety notes as you do so .
Consult an authorized Mercedes-Benz Center.
Engine damage, gear damage or electrical malfunctions
► Move the selector lever to position N.
► Shift the transfer case to neutral.
In the event of damage to the transfer case
Have the propeller shafts between the axles and the transfer case removed.
In the event of damage to the front axle
Have the propeller shaft between the rear axle and the transfer case removed.
Have the vehicle towed with the front axle raised
In the event of damage to the rear axle
Have the propeller shaft between the front axle and the transfer case removed.
Have the vehicle towed with the rear axle raised and with wheel rollers under the front axle.
See also:
Symbols
Registered trademarks:
• Bluetooth® is a registered trademark of
Bluetooth SIG Inc.
• DTS is a registered trademark of DTS, Inc.
• Dolby and MLP are registered trademarks
of DOLBY Laboratories.
...
Additional service products
Checking coolant level
WARNING
The engine cooling system is pressurized,
particularly when the engine is warm. When
opening the cap, you could be scalded by hot
coolant spraying out. There is a r ...
General notes
Before you first drive off, read this Operator's
Manual carefully and familiarize yourself with
your vehicle.
For your own safety and a longer vehicle life,
follow the instructions and warning n ...