Important safety notes
Observe the notes on tire pressure .
Information on air pressure for the tires on your vehicle can be found: • on the vehicle's Tire and Loading Information placard on the B-pillar • on the tire pressure label on the fuel filler flap • in the "Tire pressure information" section • in the "Tire pressure information" section
Checking tire pressures manually
To determine and set the correct tire pressure, proceed as follows: ► Remove the valve cap of the tire that is to be checked.
► Press the tire pressure gauge securely onto the valve.
► Read the tire pressure and compare it with the recommended value on the Tire and Loading Information placard on the B-pillar on the driver's side of your vehicle .
► The tire pressure is too low: increase the tire pressure to the recommended value.
► The tire pressure is too high: press down the metal pin in the valve using the tip of a pen, for example.
Air is released from the tire.
► Check the tire pressure again with the tire pressure gauge.
► Screw the valve cap onto the valve.
► Repeat these steps for the other tires.
Definition of terms for tires and
loading
Tire ply composition and material used
Describes the number of layers or the number
of rubber-coated belts in the tread and the
sidewall of the tire. These are made of steel,
nylon, polyester and ...
Unlocking and opening doors from
the inside
If the vehicle has previously been locked with
the SmartKey, opening a door from the inside
will trigger the anti-theft alarm system.
Switch off the alarm .
Only open the door when the traffic ...
Hazard warning lamps
► To switch on the hazard warning lamps:
press button 1.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corres ...