Hazard warning lamps
■ To switch on the hazard warning lamps: press button 1.
All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash.
■ To switch off the hazard warning lamps: press button 1.
The hazard warning lamps automatically
switch on if:
• an air bag is deployed.
• the vehicle decelerates rapidly from a speed of more than 45mph (70 km/h) and comes to a standstill.
The hazard warning lamps switch off automatically if the vehicle reaches a speed of over 6mph (10km/h) again after a full brake application.
The hazard warning lamps still operate if the ignition is switched off.
See also:
Wheel and tire combinations
Please bear the following in mind
For safety reasons, Mercedes-Benz
recommends that you only use Tires and
wheels which have been approved by
Mercedes-Benz specifically for your
vehicle.
The ...
Activating/deactivating the residual
heat function
The "residual heat" function is only available
in Canada.
It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes ...
Vehicle tool kit
General notes
The vehicle tool kit can be found in the
stowage well under the cargo compartment
floor.
Apart from certain country-specific
variations, the vehicles are not equipped
with a tire-c ...