Dashboard fuse box
Do not use a pointed object such as a screwdriver to open the cover in the dashboard. You could damage the dashboard or the cover.
Make sure that no moisture can enter the fuse box when the cover is open.
When closing the cover, make sure that it is lying correctly on the fuse box. Moisture seeping in or dirt could otherwise impair the operation of the fuses.
■ To open: pull cover 1 outwards in the direction of the arrow and remove it.
■ To close: clip in cover 1 on the front of the dashboard.
■ Fold cover 1 inwards until it engages.
See also:
Hazard warning lamps
► To switch on the hazard warning lamps:
press button 1.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corres ...
VIN
■ Open the front right-hand door.
■ Open cover 1 in the direction of the arrow
and remove it.
You will see the VIN.
The VIN can also be found in the following
locations:
• on the ...
Activating/deactivating airrecirculation
mode
Points to observe before use
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
If ...