Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running . When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0.
See also:
Activating/deactivating airrecirculation
mode
Points to observe before use
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
If ...
Tire size designation, load-bearing
capacity and speed rating
WARNING
Exceeding the stated tire load-bearing
capacity and the approved maximum speed
could lead to tire damage or the tire bursting.
There is a risk of accident.
Therefore, only use tire ty ...
The first 1,000 miles (1,500 km)
The more you look after the engine when it is
new, the more satisfied you will be with its
performance in the future.
R You should therefore drive at varying
vehicle and engine speeds for the fi ...