Dashboard fuse box
Do not use a pointed object such as a screwdriver to open the cover in the dashboard. You could damage the dashboard or the cover.
Make sure that no moisture can enter the fuse box when the cover is open.
When closing the cover, make sure that it is lying correctly on the fuse box. Moisture seeping in or dirt could otherwise impair the operation of the fuses.
► Open the driver's door.
► To
open
: pull cover 1 outwards in the direction of the arrow and remove it.
► To
close
: clip in cover 1 on the front of the dashboard.
► Fold cover 1 inwards until it engages.
See also:
Preparing the vehicle
Your vehicle may be equipped with:
• MOExtended tires (tires with run-flat
properties)
Vehicle preparation is not necessary on
vehicles with MOExtended tires.
• a TIREFIT kit
...
Restoring the factory settings
► Press the and
buttons
simultaneously for approximately six
seconds until battery check lamp 1
flashes twice. ...
Loading the vehicle
Instruction labels for tires and loads
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pil ...