Mounting dimensions
WARNING
Only have a trailer tow hitch retrofitted at a
qualified specialist workshop.
If you have a trailer tow hitch retrofitted, changes to the engine cooling system may be necessary, depending on the vehicle type.
If you have a trailer tow hitch retrofitted, observe the anchorage points on the chassis frame.
Anchorage points for the trailer tow hitch
1 Anchorage points
2 Overhang dimension
For trailer tow hitches installed at the factory, the overhang dimension including protective covering is 35.2 in (895 mm).
See also:
Hazard warning lamps
■ To switch on the hazard warning lamps:
press button 1.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corres ...
Driving on wet roads
Do not drive through flooded areas.
Check the depth of any water before driving
through it. Drive slowly through standing
water. Otherwise, water may enter the
vehicle interior or the engine com ...
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover from the front
wheel housing before you can change the
front bulbs.
■ To remove: switch off the ligh ...