Mounting dimensions
WARNING
Only have a trailer tow hitch retrofitted at a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use an authorized
Mercedes-Benz Center for this purpose. In
particular, work relevant to safety or on
safety-related systems must be carried out at
a qualified specialist workshop.
If you have a trailer tow hitch retrofitted,
changes to the cooling system and drive
train may be necessary, depending on the
vehicle type.
If you have a trailer tow hitch retrofitted, observe the anchorage points on the chassis frame.
Anchorage points for the trailer tow hitch
(example)
1 Anchorage points
2 Rear axle center line
Trailer loads
Missing values were not available at time of going to print.

Defrosting the windows
Windows fogged up on the inside
■ Activate the cooling with air
dehumidification function.
■ Activate automatic mode .
■ If the windows continue to fog up,
activate the defros ...
Shift ranges
Introduction
In transmission position D, you can use the steering wheel paddle shifters to
restrict or derestrict the shift range for the automatic transmission .
The shift range selected i ...
Activating/deactivating the residual
heat function
The "residual heat" function is only available
in Canada.
It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes ...