Setting and storing the parking position
Using reverse gear
1 Button for the driver's side exterior mirror
2 Button for the front-passenger side
exterior mirror
3 Adjustment button
4 Memory button M
You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position.
■ Make sure that the vehicle is stationary and that the SmartKey is in position 2 in the ignition lock.
■ Press button 2 for the exterior mirror on the front-passenger side.
■ Engage reverse gear.
The exterior mirror on the front-passenger side moves to the preset parking position.
■ Use adjustment button 3 to adjust the exterior mirror to a position that allows you to see the rear wheel and the curb.
The parking position is stored.
If you shift the transmission to another position, the exterior mirror on the frontpassenger side returns to the driving position.
Using the memory button
1 Button for the driver's side exterior mirror
2 Button for the front-passenger side
exterior mirror
3 Adjustment button
4 Memory button M
You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. This setting can be stored using memory button M 4.
■ Make sure that the SmartKey is in position 2 in the ignition lock.
■ With the exterior mirror on the frontpassenger side activated, use adjustment button 3 to adjust the exterior mirror. In the exterior mirror, the rear wheel and the curb should be visible.
■ Press memory button M 4 and one of the arrows on adjustment button 3 within three seconds.
The parking position is stored if the exterior mirror does not move.
■ If the mirror moves out of position, repeat the steps.
Calling up a stored parking position setting
1 Button for the driver's side exterior mirror
2 Button for the front-passenger side
exterior mirror
3 Adjustment button
4 Memory button M
■ Turn the SmartKey to position 2 in the ignition lock.
■ Adjust the exterior mirror on the frontpassenger side using button 2.
■ Engage reverse gear.
The exterior mirror on the front-passenger side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
• as soon as you exceed a speed of 9 mph
(15 km/h)
• if you press button : for the exterior
mirror on the driver's side
MOExtended tires (tires with run-flat
properties)
General notes
With MOExtended tires (tires with run flat
characteristics), you can continue to drive
your vehicle even if there is a total loss of
pressure in one or more tires. The affected
tire ...
Cornering light function
The cornering light function improves the
illumination of the road over a wide angle in
the direction you are turning, enabling better
visibility in tight bends, for example. It can
only be acti ...
Setting the exterior lighting
Setting options
Exterior lighting can be set using:
• the light switch
• the combination switch
• the on-board computer
Light switch
Operation
If you hear a warning tone when ...