General notes
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's Manual and may differ from the messages shown in the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in this Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
When you stop and park the vehicle, please observe the notes on: • HOLD function • Parking
Hiding display messages
■ Press the
or
button on the steering wheel to
hide the display message.
The display message is cleared.
The multifunction display shows high-priority display messages in red. Some high-priority display messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the messages have been remedied.
Message memory
The on-board computer saves certain display messages in the message memory.
You can
call up the display messages:
■ Press the
or
button on the steering wheel to
select the Serv. menu.
If there are display messages, the multifunction display shows 2 Messages, for example.
■ Press the
or
button to select the entry, e.g. 2
Messages.
■ Pressato confirm.
■ Press the
or
button to scroll through the display
messages.
When the ignition is switched off, all display messages are deleted, apart from some highpriority display messages. Once the causes of the high-priority display messages have been rectified, the corresponding display messages are also deleted.
Charging the battery
WARNING
During charging and jump-starting, explosive
gases can escape from the battery. There is a
risk of an explosion.
Particularly avoid fire, open flames, creating
sparks and smoking. Ensur ...
Seats
Important safety notes
WARNING
In order to avoid possible loss of vehicle
control, all seat, head restraint, steering
wheel and rear view mirror adjustments, as
well as fastening of seat belts, ...
Important safety notes
Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installing. You should therefore
have all work involving the battery carried out
at a qualified spec ...