Trailer tow hitch
Mounting dimensions
If you have a trailer tow hitch retrofitted, changes to the cooling system and drive train may be necessary, depending on the vehicle type.
If you have a trailer tow hitch retrofitted, observe the anchorage points on the chassis frame.
Anchorage points for the trailer tow hitch (example)
1 Anchorage points
2 Rear axle center line
Trailer loads
Trailer loads, trailer drawbar noseweights and axle loads
Missing values were not available at time of going to print.
Ball position
Ball position of the ball coupling
When choosing a ball coupling, the dimensions stated in the illustration must not be exceeded.
See also:
Installing/removing the towing eye
Installing the towing eye
Example: towing eye mounting covers
1 Front cover
2 Back cover
Vehicles with a trailer tow hitch: if possible, connect the towbar to the
trailer tow hitch .
The ...
Selector lever
Overview of transmission po
If the engine speed is too high or if the
vehicle is rolling, do not shift the
transmission directly from D to R, from R
to D or directly to P.
Do not open the drive ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences ...