Steering wheel EASY-ENTRY/EXIT feature
Important safety notes
WARNING
Make sure that nobody can become trapped
when you activate the EASY-ENTRY/EXIT
feature.
If there is a risk of someone becoming
trapped, stop the adjustment procedure. To
halt the procedure:
• press the steering column adjustment
button.
• press one of the memory function position buttons.
The steering column stops moving immediately.
Do not keep the memory function position button pressed as this will start the memory function and set the steering wheel and seat in motion.
Do not leave children unattended in the vehicle. They could open the driver's door and thereby unintentionally activate the EASYENTRY/ EXIT feature and become trapped.
WARNING
Let the system complete the adjustment
procedure before setting the vehicle in
motion. All steering wheel adjustment must
be completed before setting the vehicle in
motion. Driving off with the steering wheel
still adjusting could cause the driver to lose
control of the vehicle.
Do not activate the EASY-ENTRY/EXIT feature, if the seat backrest is reclined too far backwards. This can damage the front or rear seats. You must first move the backrest to a vertical position.
The EASY-ENTRY/EXIT feature makes getting in and out of your vehicle easier.
You can activate and deactivate the EASYENTRY/ EXIT feature in the on-board computer .
Position of the steering wheel when the EASY-ENTRY/EXIT feature is active
The steering wheel moves upwards and
towards the dashboard if:
• you remove the SmartKey from the ignition
lock or
• you open the driver's door with the
SmartKey in position 0 or 1 in the ignition
lock.
The steering wheel only moves upwards and towards the dashboard if it has not already reached the upper end stop.
Position of the steering wheel for driving
The steering wheel is moved to the last
selected position when:
• the driver's door is closed.
• you insert the SmartKey into the ignition lock.
The last position of the steering wheel is stored when you switch off the ignition or when you store the setting with the memory function .
See also:
Loading the vehicle
Instruction labels for tires and loads
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pil ...
Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be
obstructing the windshield wiper movement.
The wiper motor has been deactivated.
► For safety reasons, you should ...
Trailer power supply
You can connect accessories with a
maximum power consumption of 180 W to
the permanent power supply.
You must not charge a trailer battery using
the power supply.
The trailer socket of your v ...