Calling up a stored setting
If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest using the seat switch. The seat could otherwise be damaged.
► Press and hold the relevant memory button 1, 2 or 3, until the seat, head restraints, steering wheel and mirrors are in the stored position.
The setting procedure is interrupted as soon as you release the memory button.
See also:
BAS PLUS (Brake Assist System
PLUS)
Observe the "Important safety notes" section .
BAS PLUS is only available in vehicles
equipped with DISTRONIC PLUS.
For BAS PLUS to assist you when driving, the
radar sensor syst ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
...
Setting the temperature
You can set the temperature separately for
the driver's and front-passenger sides with
controls 1 or 6.
► Turn the SmartKey to position
2 in the ignition lock.
► Set control 1 ...