Changing gear
The automatic transmission shifts to the
individual gears automatically when it is in
transmission position D. This automatic
gearshifting behavior is determined by:
• a shift range restriction, if selected
• the position of the transfer case (HIGH
RANGE or LOW RANGE)
• the position of the accelerator pedal
• the road speed
See also:
DEF (BlueTEC vehicles only)
Important notes on use
To function properly, BlueTEC exhaust gas
aftertreatment must be operated with the
reducing agent DEF.
When the supply of DEF is almost used up,
the Check Additive See Op ...
Towing in the event of malfunctions
General not
If you are removing the propeller shaft,
use M10 nuts as spacers on the M8 bolts
and secure them with M8 nuts.
New self-locking nuts must be used when
the propeller shafts are refit ...
ESP® (Electronic Stability Program)
General notes
Observe the "Important safety notes" section .
ESP® monitors driving stability and traction,
i.e. power transmission between the tires and
the road surface.
If ESP ...