Fuse box in the transmission tunnel
Make sure that no moisture can enter the fuse box when the cover is open.
When closing the cover, make sure that it is lying correctly on the fuse box. Moisture seeping in or dirt could otherwise impair the operation of the fuses.
► Fold down the cup holder on the center console .
► Adjust the front-passenger seat to its foremost position .
► To open: remove screws 1.
► Remove cover 2 in the direction of the arrow.
► To close: clip in cover 2.
► Install cover 2 with screws 1.
See also:
Determining the correct load limit
Step-by-step instructions
The following steps have been developed as
required of all manufacturers under Title 49,
Code of U.S. Federal Regulations, Part 575
pursuant to the "National Traffic ...
Securing cargo
Cargo tie-down rings
General notes
WARNING
The Top Tether anchorages cannot secure a
load. If you secure a load with the Top Tether
anchorages, the Top Tether anchorages could
be pulled out duri ...
Declarations of conformity
Vehicle components which receive
and/or transmit radio waves
USA: "The wireless devices of this vehicle
comply with Part 15 of the FCC Rules.
Operation is subject to the following two
cond ...