Removing the ball coupling
X Remove the spring cotter.
■ Remove the bolt from the ball coupling recess.
■ Remove the ball coupling from the ball coupling recess.
■ Clean the ball coupling if it is dirty.
Information on cleaning and care of the trailer tow hitch can be found at .
See also:
Manual drive program
Introduction
In drive program M, you can change gear
manually using the steering wheel paddle
shifters. For this, the transmission must be in
position D. The gear currently selected and
engaged i ...
Problems with the transmission
Transfer case
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
system or transfer case could otherwise be
damaged. Contact a qualified specialist
workshop for a perf ...
Warranty
Your vehicle is covered under the terms of the
warranties printed in the Service and
Warranty Information booklet.
Your authorized Mercedes-Benz Center will
replace and repair all factory-instal ...