X To activate with the SmartKey
: remove the SmartKey from the ignition lock.
■ To activate with KEYLESS-GO
: switch the ignition off and open the driver's door.
■ To deactivate
: switch on the ignition.
The immobilizer prevents your vehicle from being started without the correct SmartKey.
When leaving the vehicle, always take the SmartKey with you and lock the vehicle.
Anyone can start the engine if a valid SmartKey has been left inside the vehicle.
The immobilizer is always deactivated when you start the engine.
In the event that the engine cannot be started when the starter battery is fully charged, the immobilizer may be faulty.
Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada).
Changing the rear bulbs
Opening and closing the service flap
You must open the service flap in the cargo
compartment before you can change the
bulbs in the brake lamp.
■ To open: release service flap 1 at the t ...
Maximum permissible gross vehicle
weight rating
► Specification for maximum gross vehicle
weight 1 is listed in the Tire and Loading
Information placard: "The combined weight
of occupants and cargo should never
exceed XXX kilograms ...
Flat tire
Preparing the vehicle
► Stop the vehicle on solid, non-slippery and
level ground, as far away as possible from
traffic.
► Switch on the hazard warning lamps
.
► Apply the parki ...