Important safety notes
WARNING
Only use fuses that have been approved for Mercedes-Benz vehicles and that have the correct fuse rating for the systems concerned. Do not attempt to repair or bridge faulty fuses. Using fuses that have not been approved or attempting to repair or bridge faulty fuses could cause the fuse to be overloaded and result in a fire. Have the cause traced and rectified at a qualified specialist workshop.
For the fuse boxes in the engine compartment and under the rear bench seat, only use fuses with the suffix "S".
Otherwise, components or systems could be damaged.
The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating.
Blown fuses must be replaced with fuses of the same rating, which you can recognize by the color and value. The fuse ratings are listed in the fuse allocation chart.
If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
See also:
Cornering light function
The cornering light function improves the
illumination of the road over a wide angle in
the direction you are turning, enabling better
visibility in tight bends, for example. The
cornering light ...
Automatic locking feature
1 To deactivate
2 To activate
■ To deactivate: press and hold button 1
for about five seconds until a tone sounds.
■ To activate: press and hold button 2 for
about five seconds unti ...
Braking
Important safety notes
WARNING
If you activate the LOW off-road gear while
driving on a slippery road surface, the wheels
may lose traction:
• if you remove your foot from the
accelerator pedal ...