On-board computer and displays

See also:

Removing the ball coupling
X Remove the spring cotter. ■ Remove the bolt from the ball coupling recess. ■ Remove the ball coupling from the ball coupling recess. ■ Clean the ball coupling if it is dirty. ...

Automatic anti-glare mirrors
The rear-view mirror and the exterior mirror on the driver's side automatically go into antiglare mode if the following conditions are met simultaneously: • the ignition is switched on and • inci ...

Important safety notes
WARNING When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could cause b ...