Instrument lighting
The lighting in the instrument cluster, in the displays and the controls in the vehicle interior can be adjusted using the brightness control knob.
The brightness control knob is located on the bottom left of the instrument cluster .
► Turn the brightness control knob clockwise or counter-clockwise.
If the light switch is set to 
,
or
, the brightness is dependent upon
the brightness of the ambient light.
The light sensor in the instrument cluster automatically controls the brightness of the multifunction display.
In daylight, the displays in the instrument cluster are not illuminated.
See also:
Convenience opening
General notes
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to
carry out the following functions
simultaneously:
• unlock the vehicle
• open the side w ...
Important safety notes
New and replaced brake pads and discs only
reach their optimum braking effect after
several hundred kilometers of driving.
Compensate for this by applying greater force
to the brake pedal. ...
Interior care
Cleaning the display
For cleaning, do not use any of the
following:
• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household
cleaning agents
These may d ...