Operating the on-board computer
Overview
1 Multifunction display
2 To switch on the Voice Control System;
see the separate operating instructions
3 Right control panel
4 Left control panel
5 Back button
► To activate the on-board computer: turn the SmartKey to position 1 in the ignition lock.
You can control the multifunction display and the settings in the on-board computer using the buttons on the multifunction steering wheel.
Left control panel
Right control pa
Back button
See also:
Setting the airflow
X Turn the SmartKey to position
2 in the ignition lock.
► To increase: press the button.
► To reduce: press the button.
The airflow from the rear-compartment
vents and the c ...
SmartKey positions
0 To remove the SmartKey
1 Power supply for some consumers, such
as the windshield wipers
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
As soon as the ig ...
Manual drive program
Switching on the manual drive program
In manual drive program M, you can change
gear using the steering wheel paddle shifters
if the transmission is in position D. You can
see the currently select ...