Multifunction display
1 Transmission position
2 Drive program
3 Description field
4 Menu bar
5 Outside temperature or speed
6 Time
7 Transfer case position
► To show menu bar 4: press the 
or 
button on the steering wheel.
Menu bar 4 disappears after a few seconds.
Text field 3 shows the selected menu or submenu as well as display messages.
For further information on displaying the transmission position, see .
You can set the time using the audio system or COMAND, see the separate operating instructions.
The following messages may appear in the
multifunction display:
Upshift indicator
Cruise control
SPEEDTRONIC
ECO start/stop function (AMG
vehicles)
LOW RANGE off-road gear
HOLD function
See also:
Reporting safety defects
USA only:
The following text is reproduced as required
of all manufacturers according to Title 49,
Code of U.S. Federal Regulations, Part 575
pursuant to the National Traffic and Motor
Vehicle Sa ...
Manual drive program
Introduction
In drive program M, you can change gear
manually using the steering wheel paddle
shifters. For this, the transmission must be in
position D. The gear currently selected and
engaged i ...
Engine compartment
Hood
Opening the hood
WARNING
Do not pull the release lever while the vehicle
is in motion. Otherwise, the hood could be
forced open by passing air flow.
This could cause the hood to come loose ...