Flat tire
Preparing the vehicle
► Stop the vehicle on solid, non-slippery and level ground, as far away as possible from traffic.
► Switch on the hazard warning lamps .
► Apply the parking brake.
► Bring the front wheels into the straightahead position.
► Move the selector lever to position P.
► Switch off the engine.
► Remove the SmartKey from the ignition lock.
The steering wheel lock stays active for as long as the SmartKey is removed.
► All occupants must get out of the vehicle.
Make sure that they are not endangered as they do so.
► Make sure that no one is near the danger area while a wheel is being changed.
Anyone who is not directly assisting in the wheel change should, for example, stand behind the barrier.
► Get out of the vehicle. Pay attention to traffic conditions when doing so.
► Close the driver's door.
See also:
Additional service products
Checking the coolant level
WARNING
In order to avoid potentially serious burns:
• use extreme caution when opening the
hood if there are any signs of vapor or
coolant leaking from the cooling sys ...
Registered trademarks
Registered trademarks:
• Bluetooth® is a registered trademark of
Bluetooth SIG Inc.
• DTS is a registered trademark of DTS, Inc.
• Dolby and MLP are registered trademarks
of DOLBY Laboratories.
...
Information about using 3-zone
automatic climate control
The following contains instructions and
recommendations to enable you to get the
most out of your automatic climate control.
• Activate climate control using the
and
buttons. The indicator lamps ...