Towing a vehicle with both axles on the ground
It is important that you observe the safety instructions when towing away your vehicle .
► Switch on the hazard warning lamps .
In order to signal a change of direction when towing the vehicle with the hazard warning lamps switched on, use the combination switch as usual. In this case, only the turn signals for the desired direction flash. When you reset the combination switch, the hazard warning lamps start flashing again.
► Turn the SmartKey to position 2 in the ignition lock .
► When the vehicle is stationary, depress the brake pedal and keep it depressed.
► Shift the transfer case to neutral.
► Shift the automatic transmission to position N.
► Release the brake pedal.
► Release the parking brake .
The transmission can only change gear if the battery has sufficient charge.
If you cannot move the selector lever to N, the propeller shafts to the driven axles must be removed.
See also:
Preparing the vehicle
Your vehicle may be equipped with:
• MOExtended tires (tires with run-flat
properties)
Vehicle preparation is not necessary on
vehicles with MOExtended tires.
• a TIREFIT kit
...
Vehicle identification plate with
vehicle identification number (VIN)
■ Open the driver's door.
You will see vehicle identification plate 1.
Example: vehicle identification plate (USA only)
2 Paint code
3 VIN
Example: vehicle identification plate (Canad ...
Driving safety systems
Driving safety systems overview
In this section, you will find information about
the following driving safety systems:
- ABS (Anti-lock Braking System)
- BAS (Brake Assist System)
- BAS PLUS (Bra ...