Replacing bulbs

See also:

Towing in the event of malfunctions
General not If you are removing the propeller shaft, use M10 nuts as spacers on the M8 bolts and secure them with M8 nuts. New self-locking nuts must be used when the propeller shafts are refit ...

Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated five times   while the lights are on and the engine is running. When you switch off ...

Floormat on the driver's side
WARNING Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened. The floormat should always be securely fastened using the fastening eq ...