Setting the airflow
X Turn the SmartKey to position 2 in the ignition lock.
► To increase: press the 
button.
► To reduce: press the 
button.
The airflow from the rear-compartment vents and the center vents is the same.
See also:
Manual drive program
Introduction
In drive program M, you can change gear
manually using the steering wheel paddle
shifters. For this, the transmission must be in
position D. The gear currently selected and
engaged i ...
Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be
obstructing the windshield wiper movement.
The wiper motor has been deactivated.
► For safety reasons, you should ...
Calling up a stored setting
If you want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest using the seat
switch. The seat could otherwise be
damaged.
► Press and h ...