Assistance menu
Introduction
In the DriveAssist menu, you have the
following options:
• show the distance display
• activate/deactivate Blind Spot Assist or Active Blind Spot Assist
Showing the distance display
► Press 
or
on the steering wheel
to select the DriveAssist menu.
► Press the 
or
button to select
Distance Display.
► Press the 
button.
The DISTRONIC PLUS distance display appears in the multifunction display .
Activating/deactivating Blind Spot Assist
► Press or
on the steering wheel
to select the DriveAssist menu.
► Press the or
button to select
Blind Spot Asst.
► Press the button.
The current selection is displayed.
► To activate/deactivate: press the
button again.
For further information about Blind Spot Assist, see .
For further information about Active Blind Spot Assist, see .
See also:
EBD (electronic brake force
distribution)
Observe the "Important safety notes"
section .
WARNING
If EBD has malfunctioned, the rear wheels can
still lock, e.g. under full braking. This
increases the risk of skidding and an acci ...
Hazard warning lamps
► To switch on the hazard warning lamps:
press button 1.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corres ...
Multifunction display
1 Transmission position
2 Drive program
3 Description field
4 Menu bar
5 Outside temperature or speed
6 Time
7 Transfer case position
► To show menu bar 4: press the
or button on ...